Hapstone 1x6" Start Diamond Stones

Hapstone Start Diamond Sharpening Stones

Fast-cutting electroplated diamond stones for efficient sharpening in HAPSTONE, JENDE JIGS, EDGE PRO, & TSPROF guided sharpening systems.

Cutting

Rapid metal removal — Electroplated diamond provides aggressive and efficient steel removal, making these stones suitable for fast sharpening work.

System

Made for Sharpening Systems — Hapstone Start Diamond stones are designed for Hapstone, Jende Jigs, Edge Pro, & TSPROF sharpening systems and are suitable for sharpening knives made from all steels.

Care

Use with water — For the best feedback, use Hapstone Diamond Plates with water as a lubricant. Clean or rinse after use and store dry between sharpening sessions.

Construction

Diamond plate on aluminum blank — Each stone consists of a diamond-bearing nickel plate mounted to a high-quality aluminum blank with laser engraving.

The plate is bonded to a 160 mm aluminum blank with beveled ends for a secure fit in the sharpening system.

Finishing

After diamond sharpening — For the finishing, the best results can be achieved with the Hapstone Fine Ceramic (Lapped/Ready). For the final polish, use Hapstone Diamond Suspension in 6 µm and 3 µm on a Cowhide Leather Strop for a refined, highly polished edge.

Diamond Plates are ferromagnetic and should not be used on magnet-based knife sharpeners.

• Stone size: 6” × 1” × 0.06” (152 × 25 × 1.5 mm)
  
• Blank size: 6.3” × 1” × 0.12” (160 × 25 × 3 mm)
  
• Abrasive: Diamond
• Binder: Electroplating
• Concentration: Diamond-bearing work surface
• Working with: Oil, without lubricants
• Stone type: Stone mounted on a 45° beveled blank